# http://people.freebsd.org/~peter/panther.dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #9: Wed Oct  9 10:36:13 PDT 2002
    obrien@panther.freebsd.org:/s/src/sys/sparc64/compile/PANTHER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc02f6000.
Timecounter "tick"  frequency 300005750 Hz
cpu0: Sun Microsystems UltraSparc-IIi Processor (300.01 MHZ CPU)
  mask=0x12 maxtl=5 maxwin=7
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: SUNW,sabre: impl 0, version 0: ign 7c0 
DVMA map: 0xc0000000 to 0xdfffffff
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x108e, dev=0x5000, revid=0x11
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0147, statreg=0x02a0, cachelnsz=16 (dwords)
        lattimer=0x28 (1200 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x108e, dev=0x5000, revid=0x11
        bus=0, slot=1, func=1
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0147, statreg=0x02a0, cachelnsz=16 (dwords)
        lattimer=0x28 (1200 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0x0-0x1fffff, 0x200000-0x3fffff, 0x400000-0x5fffff, 0x600000-0x7fffff
pcib1:   memory decode     0x0-0x1fffffff, 0x20000000-0x3fffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=2
        map[10]: type 4, range 32, base 00000400, size  8, port disabled
        map[14]: type 1, range 32, base 00001000, size  8, enabled
        map[18]: type 1, range 32, base 00002000, size 12, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x14
        bus=2, slot=1, func=0
        class=01-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0146, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x8c (4200 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=32
        map[10]: type 4, range 32, base 00000800, size  8, port disabled
        map[14]: type 1, range 32, base 00003000, size  8, memory disabled
        map[18]: type 1, range 32, base 00004000, size 12, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x14
        bus=2, slot=1, func=1
        class=01-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x8c (4200 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=32
sym0: <875> port 0x400-0x4ff mem 0x2000-0x2fff,0x1000-0x10ff irq 32 at device 1.0 on pci1
pcib1: device sym0 requested decoded memory range 0x1000-0x10ff
pcib1: device sym0 requested decoded memory range 0x2000-0x2fff
sym0: chip clock is 40218KHz
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym1: <875> port 0x800-0x8ff mem 0x4000-0x4fff,0x3000-0x30ff irq 32 at device 1.1 on pci1
pcib1: device sym1 requested decoded memory range 0x3000-0x30ff
pcib1: device sym1 requested decoded memory range 0x4000-0x4fff
sym1: chip clock is 40218KHz
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0
pcib2:   secondary bus     1
pcib2:   subordinate bus   1
pcib2:   I/O decode        0x800000-0x9fffff, 0xa00000-0xbfffff, 0xc00000-0xdfffff, 0xe00000-0xffffff
pcib2:   memory decode     0x40000000-0x5fffffff, 0x60000000-0x7fffffff, 0xe0000000-0xffffffff
pci2: <PCI bus> on pcib2
pci2: physical bus=1
        map[10]: type 1, range 32, base f0000000, size 24, enabled
        map[14]: type 1, range 32, base f1000000, size 23, enabled
found-> vendor=0x108e, dev=0x1000, revid=0x01
        bus=1, slot=1, func=0
        class=06-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns)
        map[10]: type 1, range 32, base 40008000, size 15, memory disabled
found-> vendor=0x108e, dev=0x1001, revid=0x01
        bus=1, slot=1, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
        intpin=a, irq=33
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci2
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su_pnp> addr 0x14003803f8-0x14003803ff irq 41 (no driver attached)
ebus0: <su_pnp> addr 0x14003602f8-0x14003602ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x1400340278-0x1400340287 irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003203f0-0x14003203f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
pcib2: device eeprom0 requested decoded memory range 0xf1000000-0xf1001fff
eeprom0: model mk48t59
eeprom0: registered as a time-of-day clock (resolution 1000000us)
eeprom0: hostid 808855d4
eeprom0: current time: 1034210710.000000000
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x40008000-0x4000ffff irq 33 at device 1.1 on pci2
pcib2: device hme0 requested decoded memory range 0x40008000-0x4000ffff
hme0: Ethernet address: 08:00:20:88:55:d4
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: hme0 attached
procfs registered
Timecounters tick every 10.000 msec
Initializing GEOMetry subsystem
g_add_class(DEV)
g_add_class(BSD)
g_add_class(SUN)
bpf: lo0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
(probe0:sym0:0:0:0): Retrying Command
(probe1:sym0:0:1:0): Retrying Command
g_add_class(DISK)
g_post_event(1, 0, 0, 0xc412d200, 0)
g_post_event(1, 0, 0, 0xc415ac80, 0)
pass0 at sym0 bus 0 target 0 lun 0
pass0: <SEAGATE ST39102LW 0006> Fixed Direct Access SCSI-2 device 
pass0: Serial Number LJH63572000019360P4S
pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
pass1 at sym0 bus 0 target 1 lun 0
pass1: <SEAGATE ST39102LW 0004> Fixed Direct Access SCSI-2 device 
pass1: Serial Number NJ11266400001853HHD4
pass1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST39102LW 0006> Fixed Direct Access SCSI-2 device 
da0: Serial Number LJH63572000019360P4S
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST39102LW 0004> Fixed Direct Access SCSI-2 device 
da1: Serial Number NJ11266400001853HHD4
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0a