# NYCBUG dmesgd: dmesg 	20070207 	FreeBSD 	bel 	Sun Ultra 60 Creator 3D
stray vector interrupt 2029
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #1: Mon Jan 29 10:06:19 MSK 2007
    xxx@xxx.xxx:/usr/obj/usr/src/sys/SUNC3D
real memory  = 1073741824 (1024 MB)
avail memory = 1028153344 (980 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (450.01 MHz CPU)
cpu1: Sun Microsystems UltraSparc-II Processor (450.01 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
ath_hal: xxx.xxx.xxx.xxx (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
pcib0: [FAST]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
initializing counter-timer
Timecounter counter-timer frequency 1000000 Hz quality 100
pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff,0x71000000-0x717fffff at device 1.0 on pci0
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: keyboard (1200,n,8,1)
kbd0 at sunkbd0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 830114e8
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
pcm0: <Sun Audiocs> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 on ebus0
pcm0: <CS4231A Codec Id. 10>
hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 1.1 on pci0
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: xx:xx:xx:xx:xx:xx
sym0: <875> port 0x1000-0x10ff mem 0x108000-0x1080ff,0x10a000-0x10afff at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: [GIANT-LOCKED]
sym1: <875> port 0x1400-0x14ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff at device 3.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: [GIANT-LOCKED]
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f at device 2.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0x1820-0x183f at device 2.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
ehci0: <VIA VT6202 USB 2.0 controller> mem 0x110000-0x1100ff at device 2.2 on pci0
usb2: EHCI version 1.0
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
fwohci0: <VIA Fire II (VT6306)> port 0x1880-0x18ff mem 0x112000-0x1127ff at device 2.3 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:ff:ff
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link undef, max_rec 65536 bytes.
fwohci0: max_rec 65536 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
pcib1: [FAST]
pci1: <OFW PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x100000-0x1000ff at device 1.0 on pci1
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
creator0: <Creator3D> on nexus0
creator0: console
creator0: resolution 1280x1024
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x300>
Timecounters tick every 1.000 msec
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 127
uhub0: 2 ports with 2 removable, self powered
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 127
uhub1: 2 ports with 2 removable, self powered
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 127
uhub2: 4 ports with 4 removable, self powered
Waiting 5 seconds for SCSI devices to settle
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 126>
ums0: 3 buttons and [XYZ] coordinates
SMP: AP CPU #1 Launched!
da0 at sym0 bus 0 target 0 lun 0
da0: <FUJITSU MAN3367M SUN36G 1502> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST373207LC 0003> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TOSHIBA DVD-ROM SD-M1401 1009> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0a
sa0 at sym1 bus 0 target 5 lun 0
sa0: <BNCHMARK DLT1 3E20> Removable Sequential Access SCSI-2 device
sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
umass0: <USB2.0 External Mass Storage Device, class 0/0, rev 2.00/2.40, addr 126>
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:3:0:-1: Attached to scbus3 cd1 at umass-sim0 bus 0 target 0 lun 0
cd1: <LITE-ON DVDRW SOHW-1673S JS0C> Removable CD-ROM SCSI-0 device
cd1: 40.000MB/s transfers
cd1: cd present [2295104 x 2048 byte records]