# http://www.nabble.com/Xorg-7.3-causes-kernel-panic-td14306759.html
Copyright (c) 1992-2007 The FreeBSD Project. 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
         The Regents of the University of California. All rights   
reserved. 
FreeBSD is a registered trademark of The FreeBSD Foundation. 
FreeBSD 6.2-RELEASE #0: Fri Jan 12 23:30:59 UTC 2007 
     root@...:/usr/obj/usr/src/sys/GENERIC 
real memory  = 1073741824 (1024 MB) 
avail memory = 1005133824 (958 MB) 
cpu0: Sun Microsystems UltraSparc-II Processor (449.99 MHz CPU) 
cpu1: Sun Microsystems UltraSparc-II Processor (449.99 MHz CPU) 
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs 
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,   
RF5413, REGOPS_FUNC) 
nexus0: <Open Firmware Nexus device> 
pcib0: <U2P UPA-PCI bridge> on nexus0 
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B 
pcib0: [FAST] 
pcib0: [FAST] 
pcib0: [GIANT-LOCKED] 
pcib0: [GIANT-LOCKED] 
pcib0: [FAST] 
initializing counter-timer 
Timecounter "counter-timer" frequency 1000000 Hz quality 100 
pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff 
pci0: <OFW PCI bus> on pcib0 
ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff, 
0x71000000-0x717fffff at device 1.0 on pci0 
auxio0: <Sun Auxiliary I/O> addr   
0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x14007 
2a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0 
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) 
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) 
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) 
puc0: <Siemens SAB 82532 dual channel SCC> addr   
0x1400400000-0x140040007f irq 43 on ebus0 
uart0: <SAB 82532 v3.2, channel A> on puc0 
uart0: CTS oflow 
uart1: <SAB 82532 v3.2, channel B> on puc0 
uart1: CTS oflow 
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0 
uart2: keyboard (1200,n,8,1) 
kbd0 at sunkbd0 
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0 
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb, 
0x1400300398-0x1400300399,0x1400700000-0x140070000f irq 34 (no driver attached) 
ebus0: <fdthree> addr   
0x14003023f0-0x14003023f7,0x1400706000-0x140070600f, 
0x1400720000-0x1400720003 irq 39 (no driver attached) 
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 
eeprom0: model mk48t59 
eeprom0: hostid 80ad4461 
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) 
ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver attached) 
hme0: <Sun HME 10/100 Ethernet> mem 0x10100000-0x10107fff at device 1.1 on pci0 
miibus0: <MII bus> on hme0 
qsphy0: <QS6612 10/100 media interface> on miibus0 
qsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
hme0: Ethernet address: 08:00:20:ad:44:61 
sym0: <875> port 0x1000-0x10ff mem 0x10108000-0x101080ff, 
0x1010a000-0x1010afff at device 3.0 on pci0 
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking 
sym0: [GIANT-LOCKED] 
sym1: <875> port 0x1400-0x14ff mem 0x1010c000-0x1010c0ff,0x1010e000-0x1010efff at device 3.1 on pci0 
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking 
sym1: [GIANT-LOCKED] 
pcib1: <OFW PCI-PCI bridge> at device 2.0 on pci0 
pci1: <OFW PCI bus> on pcib1 
pci1: <bridge> at device 0.0 (no driver attached) 
hme1: <Sun HME 10/100 Ethernet> mem 0x4000000-0x4007fff at device 0.1 on pci1 
miibus1: <MII bus> on hme1 
ukphy0: <Generic IEEE 802.3u media interface> on miibus1 
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
hme1: Ethernet address: 00:03:ba:34:58:a8 
pci1: <bridge> at device 1.0 (no driver attached) 
hme2: <Sun HME 10/100 Ethernet> mem 0x8000000-0x8007fff at device 1.1 on pci1 
miibus2: <MII bus> on hme2 
ukphy1: <Generic IEEE 802.3u media interface> on miibus2 
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
hme2: Ethernet address: 00:03:ba:34:58:a9 
pci1: <bridge> at device 2.0 (no driver attached) 
hme3: <Sun HME 10/100 Ethernet> mem 0xc000000-0xc007fff at device 2.1 on pci1 
miibus3: <MII bus> on hme3 
ukphy2: <Generic IEEE 802.3u media interface> on miibus3 
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
hme3: Ethernet address: 00:03:ba:34:58:aa 
pci1: <bridge> at device 3.0 (no driver attached) 
hme4: <Sun HME 10/100 Ethernet> mem 0x10000000-0x10007fff at device 3.1 on pci1 
miibus4: <MII bus> on hme4 
ukphy3: <Generic IEEE 802.3u media interface> on miibus4 
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
hme4: Ethernet address: 00:03:ba:34:58:ab 
pcib2: <U2P UPA-PCI bridge> on nexus0 
pcib2: Psycho, impl 0, version 4, ign 0x7c0, bus A 
pcib2: [FAST] 
pci2: <OFW PCI bus> on pcib2 
creator0: <Creator3D> on nexus0 
creator0: console 
creator0: resolution 1024x768 
creator1: <Elite3D> on nexus0 
creator1: resolution 1152x900 
syscons0: <System console> on nexus0 
syscons0: Unknown <16 virtual consoles, flags=0x300> 
Timecounters tick every 1.000 msec 
Waiting 5 seconds for SCSI devices to settle 
SMP: AP CPU #1 Launched! 
cd0 at sym0 bus 0 target 6 lun 0 
cd0: <PIONEER DVD-ROM DVD-303R 2.00> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 8) 
cd0: Attempt to query device size failed: NOT READY, Medium not present 
da0 at sym0 bus 0 target 0 lun 0 
da0: <SEAGATE ST336704LC 0004> Fixed Direct Access SCSI-3 device 
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged   
Queueing Enabled 
da0: 34732MB (71132960 512 byte sectors: 255H 63S/T 4427C)