# NYCBUG dmesgd: dmesg 20040630 FreeBSD Caliban Sun Ultra 5, 360Mhz UltraSparc IIi; ethernet on board, 4-port hme FreeBSD 5.2-CURRENT #0: Fri Apr 16 14:35:11 CST 2004 xxx@xxx.xxx:/usr/obj/usr/src/sys/CALIBAN Preloaded elf kernel "/boot/kernel/kernel" at 0xc050a000. Timecounter "tick" frequency 360000000 Hz quality 0 real memory = 402653184 (384 MB) avail memory = 376864768 (359 MB) cpu0: Sun Microsystems UltraSparc-IIi Processor (360.00 MHz CPU) random: nexus0: pcib0: on nexus0 pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0: [FAST] pcib0: [GIANT-LOCKED] DVMA map: 0xc0000000 to 0xc3ffffff pci0: on pcib0 pcib1: at device 1.1 on pci0 pci1: on pcib1 ebus0: revision 0x01 ebus0: mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1 ebus0: addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: addr 0x1400504000-0x1400504002 (no driver attached) ebus0: addr 0x1400400000-0x140040007f irq 43 (no driver attached) ebus0: addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: addr 0x14003062f8-0x14003062ff irq 42 (no driver attached) ebus0: addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb irq 34 (no driver attached) ebus0: addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: addr 0x1400000000-0x1400001fff on ebus0 eeprom0: could not allocate resources device_probe_and_attach: eeprom0 attach returned 6 ebus0: addr 0x1000000000-0x10000fffff (no driver attached) ebus0: addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached) hme0: at device 1.1 on pci1 pcib1: can`t decode default resource id 16 for hme0, bypassing hme0: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0 hme0: hme_stop: reset failed hme0: phy probe failed: 6 hme0: could not be configured device_probe_and_attach: hme0 attach returned 6 pci1: at device 2.0 (no driver attached) atapci0: port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 at device 3.0 on pci1 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc00020 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc00000 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc00008 ata2: at 0xc00000 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc00010 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc00018 ata3: at 0xc00010 on atapci0 pcib2: at device 1.0 on pci0 pci2: on pcib2 pcib3: at device 3.0 on pci2 pci3: on pcib3 pci3: at device 0.0 (no driver attached) pci3:0:0: Transition from D0 to D3 hme0: at device 0.1 on pci3 hme0: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x100000 pcib3: slot 0 INTB is routed to irq 25 miibus0: on hme0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: xx:xx:xx:xx:xx:xx hme0: [GIANT-LOCKED] pci3: at device 1.0 (no driver attached) pci3:1:0: Transition from D0 to D3 hme1: at device 1.1 on pci3 hme1: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x108000 pcib3: slot 1 INTB is routed to irq 26 miibus1: on hme1 ukphy1: on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme1: Ethernet address: xx:xx:xx:xx:xx:xx hme1: [GIANT-LOCKED] pci3: at device 2.0 (no driver attached) pci3:2:0: Transition from D0 to D3 hme2: at device 2.1 on pci3 hme2: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x110000 pcib3: slot 2 INTB is routed to irq 27 miibus2: on hme2 ukphy2: on miibus2 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme2: Ethernet address: xx:xx:xx:xx:xx:xx hme2: [GIANT-LOCKED] pci3: at device 3.0 (no driver attached) pci3:3:0: Transition from D0 to D3 hme3: at device 3.1 on pci3 hme3: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x118000 pcib3: slot 3 INTB is routed to irq 24 miibus3: on hme3 ukphy3: on miibus3 ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme3: Ethernet address: xx:xx:xx:xx:xx:xx hme3: [GIANT-LOCKED] Timecounters tick every 0.976 msec ad0: 8223MB [16708/16/63] at ata2-master PIO4 acd0: CDRW at ata3-master PIO4 Mounting root from ufs:/dev/ad0a