# http://www.xcllnt.net/~marcel/machines/u2/dmesg.txt
GDB: no debug ports present
stray vector interrupt 2033
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #1: Tue Jul 18 19:22:31 PDT 2006
    marcel@u2.pn.xcllnt.net:/nfs/freebsd/7.x/src/sys/sparc64/compile/U2
real memory  = 402653184 (384 MB)
avail memory = 377028608 (359 MB)
cpu0: Sun Microsystems UltraSparc-I Processor (200.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-I Processor (200.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
nexus0: <Open Firmware Nexus device>
sbus0: <U2S UPA-SBus bridge> on nexus0
sbus0: clock 25.000 MHz
sbus dvma: DVMA map: 0xfc000000 to 0xffffffff
sbus0: [FAST]
sbus0: [FAST]
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
auxio0: <Sun Auxiliary I/O> mem 0x1900000 on sbus0
sbus0: <SUNW,CS4231> mem 0xc000000-0xc0001ff irq 2020 type unknown (no driver attached)
sbus0: <flashprom> mem 0-0x7ffff,0x1380000-0x13fffff type unknown (no driver attached)
sbus0: <SUNW,fdtwo> mem 0x1400000-0x1400007 irq 2025 type block (no driver attached)
eeprom0: <EEPROM/clock> mem 0x1200000-0x1201fff on sbus0
eeprom0: model mk48t59
eeprom0: hostid 808f1049
scc0: <Zilog Z8530 dual channel SCC> mem 0x1100000-0x1100003 irq 2024 on sbus0
scc0: [FAST]
uart0: <z8530, channel A> on scc0
uart0: [FAST]
uart1: <z8530, channel B> on scc0
uart1: [FAST]
uart1: console (38400,n,8,1)
scc1: <Zilog Z8530 dual channel SCC> mem 0x1000000-0x1000003 irq 2024 on sbus0
scc1: [FAST]
uart2: <z8530, channel A> on scc1
uart2: [FAST]
uart3: <z8530, channel B> on scc1
uart3: [FAST]
sbus0: <sc> mem 0x1300000-0x1300007 type unknown (no driver attached)
sbus0: <SUNW,pll> mem 0x1304000-0x1304002 type unknown (no driver attached)
esp0: <Sun FAS366 Fast-Wide SCSI> mem 0x8800000-0x880000f,0x8810000-0x881003f irq 2016 on sbus0
esp0: FAS366/HME, 40MHz, SCSI ID 7
hme0: <Sun HME 10/100 Ethernet> mem 0x8c00000-0x8c00107,0x8c02000-0x8c03fff,0x8c04000-0x8c05fff,0x8c06000-0x8c07fff,0x8c07000-0x8c0701f irq 2017 on sbus0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:8f:10:49
sbus0: <SUNW,bpp> mem 0xc800000-0xc80001b irq 2018 type unknown (no driver attached)
isp0 mem 0x10000-0x1044f irq 1995 on sbus0
firmware_get: failed to load firmware image isp_1000
isp0: [GIANT-LOCKED]
sbus0: <HSI> mem 0x20000-0x600ff irq 2004 type network (no driver attached)
sbus0: <HSI> mem 0x20000-0x600ff irq 2012 type network (no driver attached)
nexus0: <SUNW,ffb>, type display (no driver attached)
Timecounters tick every 10.000 msec
Waiting 3 seconds for SCSI devices to settle
pass1 at esp0 bus 0 target 6 lun 0
pass1: <TOSHIBA XM5701TASUN12XCD 0997> Removable CD-ROM SCSI-2 device 
pass1: 10.000MB/s transfers (10.000MHz, offset 8)
SMP: AP CPU #1 Launched!
da0 at esp0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LSUN18G 4207> Fixed Direct Access SCSI-3 device 
da0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
Trying to mount root from ufs:/dev/da0a