# u10_5.2-BETA2_2003-12-22.txt
# http://lists.freebsd.org/pipermail/freebsd-current/2003-December/017440.html
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #0: Mon Dec 22 20:37:54 CET 2003
    root at ultra10.home.xbsd.net:/usr/src/sys/sparc64/compile/ULTRA10
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04b0000.
Timecounter "tick" frequency 333000000 Hz quality 0
real memory  = 268435456 (256 MB)
avail memory = 248119296 (236 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (333.00 MHz CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [FAST]
DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebus0
sab0: [FAST]
sabtty0: <ttya> on sab0
sabtty0: console 9600,8,n,1,-
sabtty1: <ttyb> on sab0
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80a71ffc
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
hme0: Ethernet address: 08:00:20:a7:1f:fc
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 WDMA2 controller> port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 at device 3.0 on pci1
atapci0: [MPSAFE]
ata2: at 0xc00000 on atapci0
ata2: [MPSAFE]
ata3: at 0xc00010 on atapci0
ata3: [MPSAFE]
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0x200000-0x20007f at device 1.0 on pci2
xl0: Ethernet address: 00:01:02:0d:e7:72
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0x2080-0x20ff mem 0x202000-0x20207f at device 2.0 on pci2
xl1: Ethernet address: 00:10:5a:f6:35:56
miibus2: <MII bus> on xl1
xlphy1: <3Com internal media interface> on miibus2
xlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl2: <3Com 3c905-TX Fast Etherlink XL> port 0x2400-0x243f at device 3.0 on pci2
xl2: Ethernet address: 00:60:08:0c:1b:2f
miibus3: <MII bus> on xl2
nsphy1: <DP83840 10/100 media interface> on miibus3
nsphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <OFW PCI-PCI bridge> at device 4.0 on pci2
pci3: <OFW PCI bus> on pcib3
dc0: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem 0x100000-0x1003ff at device 4.0 on pci3
pcib3: slot 4 INTA is routed to irq 28
dc0: Ethernet address: 80:00:ca:c8:25:b8
miibus4: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus4
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: <Intel 21143 10/100BaseTX> port 0x1080-0x10ff mem 0x102000-0x1023ff at device 5.0 on pci3
pcib3: slot 5 INTA is routed to irq 29
dc1: Ethernet address: 80:00:ca:c8:26:b8
miibus5: <MII bus> on dc1
ukphy1: <Generic IEEE 802.3u media interface> on miibus5
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: <Intel 21143 10/100BaseTX> port 0x1400-0x147f mem 0x104000-0x1043ff at device 6.0 on pci3
pcib3: slot 6 INTA is routed to irq 30
dc2: Ethernet address: 80:00:ca:c8:27:b8
miibus6: <MII bus> on dc2
ukphy2: <Generic IEEE 802.3u media interface> on miibus6
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: <Intel 21143 10/100BaseTX> port 0x1480-0x14ff mem 0x106000-0x1063ff at device 7.0 on pci3
pcib3: slot 7 INTA is routed to irq 31
dc3: Ethernet address: 80:00:ca:c8:28:b8
miibus7: <MII bus> on dc3
ukphy3: <Generic IEEE 802.3u media interface> on miibus7
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xfffff8001fb8f6a0
ad0: 8693MB <ST39140A> [17662/16/63] at ata2-master WDMA2
GEOM: create disk ad1 dp=0xfffff8001fb8f4a0
ad1: 8693MB <ST39140A> [17662/16/63] at ata2-slave WDMA2
acd0: CDRW <CRD-8322B> at ata3-master PIO4
Mounting root from ufs:/dev/ad0a