# r240_unknown-partial.txt # http://forum.unilans.net/index.php?PHPSESSID=9247dc90de4869111c6137fb3daee8f8&topic=96.msg306 Timecounter "counter-timer" frequency 1000000 Hz quality 100 pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff pci0: on pcib0 ebus0: mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0 ebus0: addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003 ebus0: addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: addr 0x1400504000-0x1400504002 (no driver attached) ebus0: addr 0x1400500000-0x1400500007 (no driver attached) sab0: addr 0x1400400000-0x140040007f irq 43 on ebus0 sab0: [FAST] sabtty0: on sab0 sabtty1: on sab0 ebus0: addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: addr 0x14003062f8-0x14003062ff irq 42 (no driver attached) ebus0: addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb ebus0: addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023 eeprom0: addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80d1e623 ebus0: addr 0x1000000000-0x10000fffff (no driver attached) Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at sym0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) cd0 at sym0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: cd present [1243544 x 512 byte records] SMP: AP CPU #1 Launched! (da1:sym0:0:1:0): READ(06). CDB: 8 0 0 0 2 0 (da1:sym0:0:1:0): CAM Status: SCSI Status Error (da1:sym0:0:1:0): SCSI Status: Check Condition (da1:sym0:0:1:0): MEDIUM ERROR asc:31,1 (da1:sym0:0:1:0): Format command failed (da1:sym0:0:1:0): Retrying Command (per Sense Data) (da1:sym0:0:1:0): READ(06). CDB: 8 0 0 0 2 0 (da1:sym0:0:1:0): CAM Status: SCSI Status Error (da1:sym0:0:1:0): SCSI Status: Check Condition (da1:sym0:0:1:0): MEDIUM ERROR asc:31,1 (da1:sym0:0:1:0): Format command failed (da1:sym0:0:1:0): Retrying Command (per Sense Data) (da1:sym0:0:1:0): READ(06). CDB: 8 0 0 0 2 0 (da1:sym0:0:1:0): CAM Status: SCSI Status Error (da1:sym0:0:1:0): SCSI Status: Check Condition