# netra-t1_5.0-CURRENT_2002-12-08.txt
# http://www.daemonnews.org/mailinglists/FreeBSD/freebsd-sparc64/msg02191.html
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Dec  8 12:25:21 MSK 2002
    bel@xxxxxxxxxxxxxx:/usr/obj/usr/src/sys/NETRA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0420000.
Timecounter "tick"  frequency 440013203 Hz
cpu0: Sun Microsystems UltraSparc-IIi Processor (440.01 MHz CPU)
Model: SUNW,UltraSPARC-IIi-cEngine
Initializing GEOMetry subsystem
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 7c0 
DVMA map: 0xc0000000 to 0xdfffffff
PCI-PCI bridge at 0/1/1: setting bus #s to 0/1/1
pcib0: ofw_pci_init: descending to subordinate PCI bus
device 1/1/0: latency timer 83 -> 82
pcib0: ofw_pci_init: no interrupt mapping found for 1/1/0 (preset 0)
device 1/1/1: latency timer 83 -> 82
pcib0: ofw_pci_init: mapping intr for 1/1/1 to 33 (preset was 0)
device 1/2/0: latency timer 141 -> 140
pcib0: ofw_pci_init: mapping intr for 1/2/0 to 32 (preset was 0)
device 1/3/1: latency timer 83 -> 82
pcib0: ofw_pci_init: mapping intr for 1/3/1 to 26 (preset was 0)
PCI-PCI bridge at 0/1/0: setting bus #s to 0/2/2
pcib0: ofw_pci_init: descending to subordinate PCI bus
PCI-PCI bridge at 0/1/0: setting bus #s to 0/2/3
PCI-PCI bridge at 2/1/0: setting bus #s to 2/3/3
pcib0: ofw_pci_init: descending to subordinate PCI bus
device 3/14/0: latency timer 16 -> 16
pcib0: ofw_pci_init: mapping intr for 3/14/0 to 2 (preset was 14)
pci0: <PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 1.0 on pci1
pci3: <PCI bus> on pcib2
atapci0: <CMD 646 ATA controller> port 0x1020-0x102f,0x1018-0x101b,0x1010-0x1017,0x1008-0x100b,0x1000-0x1007 irq 2 at device 14.0 on pci3
ata2: at 0x1000 on atapci0
ata3: at 0x1010 on atapci0
pcib3: <APB PCI-PCI bridge> at device 1.1 on pci0
pci2: <PCI bus> on pcib3
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci2 
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <su> addr 0x14003803f8-0x14003803ff irq 28 (no driver attached)
ebus0: <su> addr 0x14003602f8-0x14003602ff irq 20 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x1400340278-0x1400340287 irq 34 (no driver attached) 
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003203f0-0x14003203f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80da3822
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <watchdog> addr 0x1400200000-0x140020003f irq 4 (no driver attached)
ebus0: <display7seg> addr 0x1400200040 (no driver attached)
ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached)
ebus0: <flashprom> addr 0x1000400000-0x10005fffff (no driver attached)
ebus0: <flashprom> addr 0x1000800000-0x10009fffff (no driver attached)
ebus0: <i2c> addr 0x1400600000-0x1400600003 irq 40 (no driver attached)
ebus0: <i2c> addr 0x1400100000-0x1400100003 irq 27 (no driver attached)
ebus0: <SUNW,lom> addr 0x1400400000-0x1400400063 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff irq 33 at device 1.1 on pci2
hme0: Ethernet address: 08:00:20:da:38:22
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1: <Generic IEEE 802.3u media interface> on miibus0
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
Timecounters tick every 10.000 msec
acd0: CDROM <CD-224E> at ata3-master PIO4
Waiting 15 seconds for SCSI devices to settle
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST318305LSUN18G 0340> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST318305LSUN18G 0340> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
Mounting root from ufs:/dev/da0a