# e220r_6.2-PRERELEASE_2006-09-23a.txt
# http://www.freebsd.de/archive/de-bsd-questions/de-bsd-questions.200701/0023.html
stray vector interrupt 2029
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.2-PRERELEASE #6: Sat Sep 23 02:51:58 CEST 2006
    root@:/usr/obj/usr/src/sys/SERVER
real memory = 2147483648 (2048 MB)
avail memory = 2067505152 (1971 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (450.03 MHz CPU)
cpu1: Sun Microsystems UltraSparc-II Processor (450.03 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
pcib0: [FAST]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff,0x71000000-0x717fffff at de0
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x140070
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 40
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: keyboard (1200,n,8,1)
uart2: keyboard not present
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x140070)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x140) 
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 83010c9d
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 1.1 on pci0
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 00:03:ba:01:0c:9d
sym0: <875> port 0x1000-0x10ff mem 0x108000-0x1080ff,0x10a000-0x10afff at devic0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: [GIANT-LOCKED]
sym1: <875> port 0x1400-0x14ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff at devic0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: [GIANT-LOCKED]
pci0: <display> at device 5.0 (no driver attached)
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
pcib1: [FAST]
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1
pci2: <OFW PCI bus> on pcib2
pci2: <bridge> at device 0.0 (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem 0x4000000-0x4007fff at device 0.1 on pci2
miibus1: <MII bus> on hme1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: 08:00:20:f1:0c:e4
pci2: <bridge> at device 1.0 (no driver attached)
hme2: <Sun HME 10/100 Ethernet> mem 0x8000000-0x8007fff at device 1.1 on pci2
miibus2: <MII bus> on hme2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme2: Ethernet address: 08:00:20:f1:0c:e5
pci2: <bridge> at device 2.0 (no driver attached)
hme3: <Sun HME 10/100 Ethernet> mem 0xc000000-0xc007fff at device 2.1 on pci2
miibus3: <MII bus> on hme3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme3: Ethernet address: 08:00:20:f1:0c:e6
pci2: <bridge> at device 3.0 (no driver attached)
hme4: <Sun HME 10/100 Ethernet> mem 0x10000000-0x10007fff at device 3.1 on pci2
miibus4: <MII bus> on hme4
ukphy4: <Generic IEEE 802.3u media interface> on miibus4
ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme4: Ethernet address: 08:00:20:f1:0c:e7
nexus0: <syscons>, type (unknown) (no driver attached)
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TOSHIBA DVD-ROM SD-M1401 1009> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at sym0 bus 0 target 0 lun 0
da0: <FUJITSU MAT3073NC 0108> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 70136MB (143638992 512 byte sectors: 255H 63S/T 8941C)
GEOM_MIRROR: Device gm0 created (id=1247000163).
GEOM_MIRROR: Device gm0: provider da0 detected.
Root mount waiting for: GMIRROR
Root mount waiting for: GMIRROR
Root mount waiting for: GMIRROR
Root mount waiting for: GMIRROR
GEOM_MIRROR: Force device gm0 start due to timeout.
GEOM_MIRROR: Device gm0: provider da0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0a